GET THE ANGLE YOU NEED
Ti-Bases are available for only $39.00 with screw,
driver sold separately.
DENTIST
One Torx® ball ANGLEBase® angle driver is all you need to use the ANGLEBase® Ti Base, which is available for over 12 implant systems and 30+ platforms.
Up to 25º angular adjustment with 360º of freedom in positioning the screw channel ti base.
Flat seat ANGLEBasee® screws minimize tension when slightly misaligned and transfer torque to the optimal preload of the screw.
Unique SelectGrip® design surface finish provides maximun cement retention area for optimal bonding strenght.
DENTAL LAB
All plastic castable sleeves are available in straight, 10º and 20º.
Library files are available for 3Shape®, Exocad® and Dental Wings®.
Made of Titanium Grade V ELI with a gold anodized treatment.
The cement shaft surface features the patented SelectGrip® for optimal cement bonding retention.
All ANGLEBase® screws have a flat seat to minimize tension. An ANGLEBase® screw is provided with the ANGLEBase® ti base.
The Torx® ball ANGLEBase® angle driver is available In 20, 24 and 35mm lengths.
ANGLEBase® Angulated Screw Channel Solution

There are numerous clinical situations where the long-axis of the implant results in an unfavorable location of the prosthetic screw access hole. One solution might be to sacrifice the retrievability and cement over the access hole or compromise the esthetic results.
But we have a better solution...

NOW DESS introduces the ANGLEBase® Angulated Screw Channel Solution that will allow for an angular adjustment of up to 25º. The specially designed screw and driver concept will retain the ability to use full recommended torque even at full angulation.

The ANGLEBase® is made of titanium grade V ELI and has a gold-anodized surface finishing that will further optimize the appearance especially in the esthetic zone. The shaft surface also features the patented and well proven SelectGrip® for optimal cement retention.

To optimize the angulation of the access hole, the shaft of the ANGLEBase® has been reduced to only 3mm, but with a bonding area of more than 33mm, greater than other solutions.

During the development we conducted both de-bonding and static fatigue tests comparing the results not only to the standard DESS Ti-Base but also to competitors' components. A dynamic fatigue test was also conducted and passed the required 5 million load cycles.

Volume Pricing
Volume pricing is available. Please contact us at (855) 337-7872
Current Implant systems
Straumann® Bone and Tissue level
Nobel Replace®, Active®, and Branemark
3i Certain®
Astra® Osseospeed and Astra EV®
Zimmer®/BioHorizons®/MIS®
Megagen Anyridge®
Hiossen®
Ankylos®
Dentium®
Camlog®
Conelog®
Xive®